Product record
Pressure-Sensitive Liner
A pressure-sensitive foam liner for dry solids, used without added sealing equipment.
Read this first
Can this record be your starting point?
- Start here when
- A pressure-sensitive liner made from PS foam and pressure-sensitive adhesive. The adhesive side faces the bottle opening and the printed side faces the cap.
- Confirm first
- Provide the bottle and cap materials, neck dimensions, contents, closure pressure and use environment.
- Not enough on its own
- The customer material describes use for dry solids and does not recommend it for corrosive or volatile liquids. Adhesion depends on environmental temperature, cap pressure and other actual conditions.
What this record is
Definition
A pressure-sensitive liner made from PS foam and pressure-sensitive adhesive. The adhesive side faces the bottle opening and the printed side faces the cap.
Source name
压敏垫片
Product role
Sealing material
Supply role
Self manufactured
Product facts
Material / structure
PS foam with pressure-sensitive adhesive.
Material / structure group
PS foam
Sealing method
The liner is positioned in the cap and activated by tightening the closure; the customer material states that adhesion develops over about 120 minutes and varies with temperature and cap pressure.
Sealing method group
Pressure-sensitive
Applicable conditions
What must be known first
Provide the bottle and cap materials, neck dimensions, contents, closure pressure and use environment.
Known limits
Limits and open checks
The customer material describes use for dry solids and does not recommend it for corrosive or volatile liquids. Adhesion depends on environmental temperature, cap pressure and other actual conditions.
Documents and versions
No document is published against this record yet. Tell us the product and what you need to review, and we will confirm which documents exist for it and at which version.